“Close your eyes and begin to relax. Take a deep breath, and let it out slowly. Concentrate on your breathing.” – Dream Theather – Regression
Deep Breath is two way Bass Reflex Speakers, featuring deep and precise bass, great dynamics, clear and present voices. Perfect for medium sized environments, they are characterized by a clean design and are well suited to all décor styles.
Thanks to the quality of transducers and internal components such as silver cables and high end filters, Deep Breath speakers reach the best results for his category.
|Deep Breath Loudspeakers||2 ways, Bass Reflex|
|Nominal Impedance||4 Ohm|
(+/- 3 dB)
|48 Hz – 40.000 Hz|
|Sensitivity||91,5 dB, 1m, 2,83V|
-Coated Fiberglass Cone, Ferrite Magnet, Alu Ring
- High Output 91dB @ 2,83V
- Magnet System w. Alu Ring
- Die cast Alu Chassis vented below spider
- Coated NRSC Fibre Glass Cone
- Low Damping SBR Rubber Surround
- Double Ferrite Magnet, Chamber
- Extended Frequency To Above 40KHz
- Low Distortion
- Dual Ring Radiator diaphragm (Patent)
- Very Low Resonance Frequency - 450Hz
- High sensitivity - 92dB
- Wave-guide center plug (Patent)
|Peak Power||180 W|
|Max Input Power (without distortions)||160 W, senza distorsioni|
Cutting frequencies: 1900 Hz
|Spatial dispersion||-2 dB a 30° from axis, at 10.000 Hz
-10 dB a 60° from axis, at 10.000 Hz
|Binding Post||“Banana” Plug
Cable up to 6 mmq
|Dimensions||247 mm (L) x 351 mm (H) x 325 mm (P)|
|weight||22 Kg (couple)|
|Structure Component Care Orchestra Multi Layer||Expanded Polyurethane with 3 cm cones - 30Kg/m3
|Frontal Panel||Asymmetric Front Panel CARE ORCHESTRA Asymmetrical response
|Internal Wiring||Van Den Hul
2 conductor groups, each with 98 x 0.16 mm. strands.
The total cross-section area per conductor is 1.97 mm²; close to AWG 14.
The conductor material is a very high grade large crystal OFC with a dense pure silver coating.
The resistance per lead is 0.88 Ohm/100 meter.
The external dimensions are 8.5 x 3.4 mm.
The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability.
|Capacitors||Audiophile Capacitors Ultra Fast
Volt: 800 V / 1200 V
Tolerance: ± 2 %
Volt: 630 V / 400 V
Tolerance: ± 5 %
– 5 Watt / 5%
-10 Watt / 5%
|Coils||High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications.
High-purity copper wire wound around a Permite core, for a high inductance
|Lacquering / Leather||Lacquering “Golden Light”
Lacquering “Powder Light”