Divina Supreme Evo REVIEW
Divina Supreme Evo
A 3-way bass reflex floor-standing high end speaker, characterized by an absolute, crystal clear, a precise and faithful reproduction of sound with the ability to reproduce a three-dimensional sound stage is astounding realism and dynamics.
Divina Supreme Evo is the evolution of the Divina Supreme loudspeaker, with an optimised filter to guarantee perfection of timbre, dynamics, detail and balance. New leather covering for the transducers. The evolution of perfection.
Scan Speak Illuminator transducers, Ultra High End crossover components, double base with anti-vibration cones, High End Van Den Hul silver-plated cables
| Specifications | |
| Speakers | Hi-End Loudspeakers, 3 ways, Bass Reflex |
| Nominal Impedance | 4 Ohm |
| Frequency range (+/- 3 dB) | 36 Hz – 38.000 Hz |
| Sensitivity | 90 dB, 1m, 2,83V |
| Woofer | Scan-Speak Revelator – Paper Cone of 180 mm diameter – Low-Loss linear suspension – Die cast Alu Chassis vented below spider – Sliced Cone (Controls Cone Breakups) – Low Damping SBR Rubber Surround – Large Ferrite Magnet System |
| Midrange | Scan-Speak Illuminator – 120 mm of diameter – Under-Hung Neodymium Motor Design – One Piece Cone-Dust Cap – Very Wide Frequency Response 100-10KHz – Patented Symmetrical Drive (SD-3) – Low-Loss Linear Suspension |
| Tweeter | Scan-Speak Illuminator – – 1″ Textile Dome Diaphragm – Magnet System w. Alu Ring – Diffraction Damping Rubber Front – Large Roll Surround f. Wide Dispersion – AirCirc Motor Design w. 6 Neo magnets – Die Cast Rubber Painted Alu Face Plate |
| Peak Power | 260 W |
| Max Input Power | 150 W (without distortions) |
| Crossover | 2° Cutting frequencies 180 Hz, 2900 Hz |
| Spatial dispersion | -2 dB a 30° from axis, at 10.000 Hz -6 dB a 60° from axis, at 10.000 Hz |
| Volume | 39 Liters / 10 Liters |
| Binding Post | “Banana”, cable up to 6 mmq |
| Dimensions | 354 mm (L) x 1147 mm (H) x 358 mm (P) |
| weight | 70 Kg (couple) |
