“Exclusive Calacatta Oro Marble Loudspeakers”
A 3-way bass reflex floorstanding Calacatta Oro Marble speaker, characterized by an absolute, crystal clear, as precise and faithful reproduction of the sound and can reproduce a three-dimensional sound stage is astounding realism and dynamics.
Equipped with transducers with advanced engines, where possible even neodymium, providing unparalleled power and performance by optimizing the volume occupied. The speakers Supreme offer the ultimate balance of performance and size for a speaker to be 49 liters total.
The silver cables and high end components of the crossover filter guarantee amazing results; no comparison with speakers of his same category
|Supreme Loudspeakers||3 ways, Bass Reflex|
|Nominal Impedance||4 Ohm|
(+/- 3 dB)
|36 Hz – 38.000 Hz|
|Sensitivity||90 dB, 1m, 2,83V|
|Woofer||Scan-Speak Revelator – Paper Cone of 180 mm diameter |
- Low-Loss linear suspension
- Die cast Alu Chassis vented below spider
- Sliced Cone (Controls Cone Breakups)
- Low Damping SBR Rubber Surround
- Large Ferrite Magnet System
|Midrange||Scan-Speak Illuminator – 120 mm of diameter |
- Under-Hung Neodymium Motor Design
- One Piece Cone-Dust Cap
- Very Wide Frequency Response 100-10KHz
- Patented Symmetrical Drive (SD-3)
- Low-Loss Linear Suspension
|Tweeter||Scan-Speak Illuminator – |
- 1" Textile Dome Diaphragm
- Magnet System w. Alu Ring
- Diffraction Damping Rubber Front
- Large Roll Surround f. Wide Dispersion
- AirCirc Motor Design w. 6 Neo magnets
- Die Cast Rubber Painted Alu Face Plate
|Peak Power||260 W|
|Max Input Power (without distortions)||150 W|
Cutting frequencies 400 Hz, 2900 Hz
|Spatial dispersion||-2 dB a 30° from axis, at 10.000 Hz |
-6 dB a 60° from axis, at 10.000 Hz
|Volume||39 Liters / 10 Liters|
|Binding Post||“Banana”, cable up to 6 mmq|
|Dimensions||354 mm (L) x 1147 mm (H) x 358 mm (P)|
|weight||340 Kg (couple)|
|Structure Component Care Orchestra Multi Layer||Expanded Polyurethane with 3 cm cones - 30Kg/m3 |
|Frontal Panel||Asymmetric Front Panel CARE ORCHESTRA Asymmetrical response |
|Internal Wiring||Van Den Hul |
2 conductor groups, each with 98 x 0.16 mm. strands.
The total cross-section area per conductor is 1.97 mm²; close to AWG 14.
The conductor material is a very high grade large crystal OFC with a dense pure silver coating.
The resistance per lead is 0.88 Ohm/100 meter.
The external dimensions are 8.5 x 3.4 mm.
The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability.
|Capacitors||Audiophile Capacitors Ultra Fast |
Volt: 800 V / 1200 V
Tolerance: ± 2 %
Volt: 630 V / 400 V
Tolerance: ± 5 %
|Resistors||MOX Resistors |
– 5 Watt / 5%
-10 Watt / 5%
|Coils||High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications. |
High-purity copper wire wound around a Permite core, for a high inductance
|Lacquering / Leather||Lacquering “Golden Light” |
Lacquering “Powder Light”