Design Marble High End Speakers: Wave Marble Edition
The matter comes to life:
“From a unique block of matter is born a sculpture, an artistic innovation of the highest level, a quality piece exhibited to the people during fuorisalone 2015.”
Every speaker is a unique piece, as peculiar and unrepeatable as the block of marble from which it is born.
The full range bass reflex technology for the speaker is made from a peculiar block of stone and is more valuable. The Carrara marble is a material that gives thanks to the anisotropic and rigid structure. Shades and tones of excellence: the sound comes to life.
|Wave Speakers||Zero Offset – 1 way – Bass Reflex|
|Nominal Impedance||8 Ohm|
(+/- 3 dB)
|68 Hz – 18.000 Hz|
|Sensitivity||85 dB, 1m, 2,83V|
|Woofer||-Long throw, high power loading design. |
-Bamboo fiber paper cone with rubber surround.
-Die cast basket.
-Vented pole piece.
-Low 2nd, 3rd distortion design.
|Peak Power||80 W|
|Max Input Power (without distortions)||60 W|
|Spatial dispersion||-3 dB a 30° dagli assi, a 10.000 Hz |
-12 dB a 60° dagli assi, a 10.000 Hz
|Binding Post||“Banana” plug, cable up to 6 mmq|
|Dimensions||170mm (L) x 240mm (H) x 235mm (W)|
|Structure Component Care Orchestra Multi Layer||Expanded Polyurethane with 3 cm cones - 30Kg/m3 |
|Frontal Panel||Asymmetric Front Panel CARE ORCHESTRA Asymmetrical response |
|Internal Wiring||Van Den Hul |
2 conductor groups, each with 98 x 0.16 mm. strands.
The total cross-section area per conductor is 1.97 mm²; close to AWG 14.
The conductor material is a very high grade large crystal OFC with a dense pure silver coating.
The resistance per lead is 0.88 Ohm/100 meter.
The external dimensions are 8.5 x 3.4 mm.
The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability.
|Capacitors||Audiophile Capacitors Ultra Fast |
Volt: 800 V / 1200 V
Tolerance: ± 2 %
Volt: 630 V / 400 V
Tolerance: ± 5 %
|Resistors||MOX Resistors |
– 5 Watt / 5%
-10 Watt / 5%
|Coils||High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications. |
High-purity copper wire wound around a Permite core, for a high inductance
|Lacquering / Leather||Lacquering “Golden Light” |
Lacquering “Powder Light”