HYBRID AMPLIFIER VOICE
“THE MIND THAT OPENS TO A NEW IDEA NEVER RETURNS TO ITS ORIGINAL SIZE“ –ALBERT EINSTEIN
The Hybrid Amplifier voice is a result of the commitment of Care Orchestra in an audiophile amplification sector and represents the perfect complement of the audio speakers, both technical, style and design.
It is an integrated high polarized class AB1 hybrid amplifier whose High End heart beat is enclosed in a structure of lacquered wood and fine leather.
Valve preamplifier section to offer a full and warm sound with realistic male and female voices
Final section of power with discrete elements to ensure maximum transient speed and deliver maximum undistorted power on both 8 and 4 and 2 ohms
Balanced and Unbalanced Inputs
|Amplifier||Hybrid Integrated stereo class AB|
|Valve preamplifier section||12AX7B|
|Transistors of final section of power||2SC5200 and 2SA1943|
|Output Power (1KHz)||2 x 110W (8 Ohm), 2 x 220W (4 Ohm)|
|Total Harmonic Distortion (1W)||0,2 %|
|Bandwidth (1W)||1 Hz – 60 KHz |
|Damping Factor||>100 |
|Signal to Noise Ratio||>100 dB|
|Input Impedance||100 KΩ (RCA), 200 KΩ (XLR) |
|Pre-amplifier Input||2 x RCA, 2 x XLR, Amplificazione Diretta |
|Power Supply||120V / 230V – 50/60 Hz, 600VA Max |
|Dimensions||500 mm (L) x 180 mm (H) x 500 mm (P) |
|Structure Component Care Orchestra Multi Layer||Expanded Polyurethane with 3 cm cones - 30Kg/m3 |
|Frontal Panel||Asymmetric Front Panel CARE ORCHESTRA Asymmetrical response |
|Internal Wiring||Van Den Hul |
2 conductor groups, each with 98 x 0.16 mm. strands.
The total cross-section area per conductor is 1.97 mm²; close to AWG 14.
The conductor material is a very high grade large crystal OFC with a dense pure silver coating.
The resistance per lead is 0.88 Ohm/100 meter.
The external dimensions are 8.5 x 3.4 mm.
The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability.
|Lacquering / Leather||Lacquering “Golden Light” |
Lacquering “Powder Light”